TAPE MODE

shift + help = set date - time
shift + tempo = detune notes - cents 
shift + tape = erase tape
shift + synth = undo edits and revert to the preset
shift + drum = undo edits and revert to the preset
shift + mixer = signal flow screen
blue (default) = explore the tape in bits of 1/24 seconds
blue (while playing) = scrub through tape
blue (while recording) = change pitch
shift + blue = slide a take
green = slide loop out
shift + green = slide loop in
white = change tape speed like +1, +2, +3
shift + white = change tape speed in percentages
orange = record level
shift + orange = sensitive record level (change in tiny bits)
T1-4 = select track
shift + T1-4 = mute/reactivate track
< > = rewind / forward
play + < > = fast rewind / forward
shift + < > = jump from bar to bar
stop + < = jump to the very beginning of the tape.
stop + > = jump to the end of the last take on the tape, if there are multiple tracks overlapping, this will go to the longest one of the last takes.
shift + play = reverse playback
rec (hold) = stand ready for recording (press a key)
shift + rec = stand ready for tape roll (press play to go)
split = a take to pieces
shift + split = join takes (joins the next closest take on either side of the active one)
lift = cut or delete a take
shift + lift =  advanced lift - lift all tracks into memory.
region lift = use the loop in and out points to define the part you want to lift.
drop = paste a take (tape moves each time to the end of a dropped take)
sequencer = open/turn-off sequencer
shift + sequencer = select sequencer mode
(1) loop in = sets the loop in point of the tape.
(2) loop out = this sets the loop out point.
(3) loop toggle = toggles loop on and off, remembers the in and out of the previous loop
(3) (when playing) = recreates the previous loop 
shift + loop toggle = loop current take.
(4) break = stops the tape. if a loop is active it will continue in the background to keep the break in time.
(5) reverse = change direction of the tape.
(6) chop = a tempo locked repeat type of effect.
(7)-(8) Memo 1-2 = memorize any parameter in tape or mixer for instant recall.

WHEN T2 IN SYNTH:
shift = play mode                         

IN DRUM MODE ENGINE (T1):

blue = pitch
shift + blue = direction
green = in point
shift + green = fine tune in point, sensitive
white = out point
shift + white = fine tune out point, sensitive
orange = play mode
shift + orange = level

IN DRUM MODE DYNAMIC ENVELOPE (T2)
blue = attack level
green = mid-part level
white = release level
orange = adjust region

IN SYNTH AND DRUM MODE:
1-8 = instant access keys to sounds
shift + synth = undo edits and tweaks (done with T1-4)
shift + 1-8 = change the sound attached to the instant access key         
shift + T1-4 = change the modules of the sound without changing the sound. 

for example, shift + T1 will change the
synth engine but it will keep the tweaks and edits you made on the sound,
contrary to shift + 1, which will change the sound itself by selecting a sound
from one of the synth engines thus making you lose all the tweaks and edits
you made.

< > = octave shift

IN MIXER MODE:
shift + mixer = signal flow screen